A315N U1 OS12 Scatter Firmware [Dead Boot Repair]

(A315NKSU1DVE1) free for all A315N U1 OS12 Scatter Firmware halabtech A315N U1 OS12 Scatter Firmware Dead Boot Repair A315N U1 OS12 Scatter Firmware Dead Boot Repair A315NKSU1DVE1 A315N U1 OS12 Firmware Dead Boot Repair A315NKSU1DVE1 A315N U1 OS12 Firmware Dead Boot Repair for file link subscribe the channel comment like halabtech file file halabtech free firmware samsung free autopatch file halabtech halabtech autopatch file halabtech free autopatch files halabtech solution free free solution halabtech halabtech solution Samsung Fix Fingerprint sensor calibration problem A515f u5 Fix Fingerprint sensor calibration problem tested 100% HereA515f u5 Fix Fingerprint sensor calibration problem A515f Fix Fingerprint sensor calibration problem A70 Fix Fingerprint sensor calibration problem A50 Fix Fingerprint sensor calibration problem A51 Fix Fingerprint sensor calibration problem A71 Fix Fingerprint sensor calibration problem A30 Fix Fingerprint sensor calibration problem How to Fix Fingerprint Error on Galaxy A71 How to Fix Fingerprint Error on Galaxy A50 How to Fix Fingerprint Error on Galaxy A51 How to Fix Fingerprint Error on Galaxy A70 How to Fix Fingerprint Error on Galaxy A30 A515f Fix Fingerprint sensor calibration problem tested 100% HereA515f Fingerprint sensor calibration problem tested solution 100% A515f Fingerprint sensor calibration problem solution 100% tested A51 Fingerprint sensor calibration problem solution 100% tested A51 Fingerprint sensor calibration problem solution

A315N U1 Dead boot repair By USB Without Jtag Solution

(Need Chimera Tool)

1- Disassemble the phone and take out the motherboard ,work will be done on the motherboard without battery

2- Unprotect memory

3- make short to clk resistance with gnd

 

4- Connect the phone to the computer via usb

5- Go to Chimera and wait until the phone recognizes as shown in the picture

 

- In case it does not recognize as in the picture and asks you Preloader,you must cancel the process and then repeat the steps and re-short,you may need to try more than once, but you will succeed in the end

- In case recognize the device as Unidentified MTK Phone No problem in that

6- Go to the GENERAL tab, then make update Firmware

Chimera will ask you to choose a ROM, but click as shown in the picture and select All Files

Then select this ROM exclusively without decompressing to download from here

Dwonload

 

Press start and wait for the flashing to finish

7- The device will boot on the first logo,Enter it as a download and re-flash the same flash in the download mode exclusively

Important note: clk resistance may be damaged during its short with gnd and the device will enter with you in broom mode automatically even if you apply the steps

To solve this problem, you must permanently remove the resistance and shorten it from both sides

Done.

A315N U1 OS12 Scatter Firmware halabtech

 Download