ELS NX9 HUAWEI ID Remove Firmware

ELS-NX9 Downgrade Firmware

ELS-NX9 HUAWEI ID Remove Firmware

ELS-NX9 HUAWEI ID Remove

ELS-NX9 Downgrade Firmware HUAWEI ID Remove

ELS-NX9 11.0.0.249(C185E6R6P3) Firmware

ELS-NX9 11.0.0.249(C185E6R6P3)  HUAWEI ID Remove Firmware

ELS-NX9 EMUI11.0.0

ELS-NX9 11.0.0.249(C185E6R6P3)_Firmware_EMUI11.0.0_05016QGH.zip

ELS NX9 Downgrade Firmware

ELS NX9 HUAWEI ID Remove Firmware

ELS NX9 HUAWEI ID Remove

ELS NX9 Downgrade Firmware HUAWEI ID Remove

ELS NX9 11.0.0.249(C185E6R6P3) Firmware

ELS NX9 11.0.0.249(C185E6R6P3)  HUAWEI ID Remove Firmware

ELS NX9 EMUI11.0.0

ELS NX9 11.0.0.249(C185E6R6P3)_Firmware_EMUI11.0.0_05016QGH.zip

ELS-NX9 Downgrade Firmware

ELS-NX9 HUAWEI ID Remove Firmware

ELS-NX9 HUAWEI ID Remove Firmware

ELS-NX9 Downgrade Firmware HUAWEI ID Remove

ELS-NX9 11.0.0.249(C185E6R6P3) Firmware

ELS-NX9 11.0.0.249(C185E6R6P3)  HUAWEI ID Remove Firmware

ELS-NX9 EMUI11.0.0 Firmware

ELS-NX9 11.0.0.249(C185E6R6P3)_Firmware_EMUI11.0.0_05016QGH.zip

ELS-NX9 11.0.0.249(C185E6R6P3)_Firmware_EMUI11.0.0_05016QGH

ELS NX9 Downgrade Firmware

ELS NX9 HUAWEI ID Remove Firmware

ELS NX9 HUAWEI ID Remove Firmware

ELS NX9 Downgrade Firmware HUAWEI ID Remove

ELS NX9 11.0.0.249(C185E6R6P3) Firmware

ELS NX9 11.0.0.249(C185E6R6P3)  HUAWEI ID Remove Firmware

ELS NX9 EMUI11.0.0 Firmware

ELS NX9 11.0.0.249(C185E6R6P3)_Firmware_EMUI11.0.0_05016QGH.zip

ELS-NX9 Downgrade Firmware Halabtech

ELS-NX9 HUAWEI ID Remove Firmware Halabtech

ELS-NX9 HUAWEI ID Remove Firmware  Halabtech

ELS-NX9 Downgrade Firmware HUAWEI ID Remove  Halabtech

ELS-NX9 11.0.0.249(C185E6R6P3) Firmware Halabtech

ELS-NX9 11.0.0.249(C185E6R6P3)  HUAWEI ID Remove Firmware Halabtech

ELS-NX9 EMUI11.0.0 Firmware Halabtech

ELS-NX9 11.0.0.249(C185E6R6P3)_Firmware_EMUI11.0.0_05016QGH.zip  Halabtech

ELS-NX9 11.0.0.249(C185E6R6P3)_Firmware_EMUI11.0.0_05016QGH Halabtech

ELS NX9 Downgrade Firmware Halabtech

ELS NX9 HUAWEI ID Remove Firmware Halabtech

ELS NX9 HUAWEI ID Remove Firmware Halabtech

ELS NX9 Downgrade Firmware HUAWEI ID Remove Halabtech

ELS NX9 11.0.0.249(C185E6R6P3) Firmware Halabtech

ELS NX9 11.0.0.249(C185E6R6P3)  HUAWEI ID Remove Firmware Halabtech

ELS NX9 EMUI11.0.0 Firmware Halabtech

ELS NX9 11.0.0.249(C185E6R6P3)_Firmware_EMUI11.0.0_05016QGH.zip Halabtech

How to Remove Huawei P40 Pro ELS-NX9, ELS-N04 FRP Lock

You can easily use the EFT dongle, UMT dongle, Octopus FRP tool, MRT key tool, etc to remove FRP (Factory Reset Protection) tool and bypass the screen lock (pattern/pin/password) from the Huawei P40 Pro.

Otherwise, you can try other tools to use the test point to boot your phone in an emergency download mode by removing the battery and short test point to the ground & inserting a USB cable.

So, if you’re interested in booting your Huawei P40 Pro ELS-NX9, ELS-N04 device into the Download Mode to flash the Stock Firmware then this article is for you. While if you want to install the software on bootloader-locked Huawei P40 Pro ELS-NX9, ELS-N04 then you’ll have to boot it into the EDL mode then you can flash the stock firmware.

How to Remove Huawei ID on Huawei P40 Pro ELS-NX9, ELS-N04 FRP Lock

Download and install the Chemira Sigma or etc Software on your computer.

Connect your device to PC using a USB Cable in upgrade mode

Select the Serial Port as DBA Adaptor Port.

Select the Software Testpoint On Off

Now load the downloaded firmware package “UPDATE.APP”

The software will start the flashing process. Wait for a few seconds or minutes to complete the process on your Huawei P40 Pro. Do not remove your device.

After the process, the device will enter factory mode.

Now you can connect your device again by removing and connecting the USB cable again.

Now under serial port, make sure you select USB (autodetect)

Select Authorize has Huawei

Tap on Remove Huawei ID.

Chemira Tool Remove Huawei ID

The process will begin to remove the firmware protection, also called FRP lock.

After successfully removing the Huawei ID, you have to set the testpoint OFF. This will again revive the phone from factory mode to normal phone mode.

Select the Serial Port as USB (autodetect), Authorize with device model, and then tap the Software Testpoint on/off.

After completing the process, your device will be back to normal

That’s it, guys. We hope this guide was helpful to you. For additional queries, you can comment below.

Download